Nowadays most people choose the wall-mounted cast iron radiator, due to that can save too much space, also can be ornament a blank wall .
DIMENSIONS Section Length :60 mm Section Height: 576 mm Section Depth: 82 mm Central Distance: 500mm Test Pressure ≤Mpa: 1.2 Interface Size: G1 1/4
HEAT OUTPUT 106 W/ section
WEIGHT Empty weight per section 4.0 KG |
For cast iron radiator, you could assemble different elements into one piece and choose different colors:
Guarantee: 10 years
Packed by: EPE Foam and pallet
Delivered in: 30 days
Delivered ready for installation
Hot Tags: cheap old style victorian radiators, home heating radiator, cast iron radiator parts, radiator manufacturers china, hot water radiators, heater radiator, radiator central heating, hydronic heating radiator, central heating radiator, water radiator
Here are some tips for wall-mounted radiators
(1)Pressure requirement for radiator
The working pressure range of radiator is 0.8-1.2mpa for cast iron radiator, 0.4-0.8mpa for steel plate radiator, 0.4-0.8mpa for steel column radiator, 0.4-1.0mpa for copper-aluminum composite radiator and 0.4-1.0mpa for plastic aluminum radiator.The radiator with poor pressure performance is more likely to leak and burst. Pay attention to the pressure performance of the radiator when choosing a radiator.The radiators of SHANXI BEIZHU casting radiators generally bear pressure of more than 2.0Mpa and meet the requirements of many heating systems.
(2) Radiator load bearing requirements
In order to ensure the safety of the radiator during use, the wall load which is hanging the radiator should be no less than three times the weight of the radiator itself.If the weight of a single radiator is heavy and the load is heavy, it is recommended to install the support to prevent accidents from falling and endangering personal and family property safety.In addition, other things should not be put above the radiator, otherwise it will not only increase the heating capacity of the radiator, but also block the heat emission, not conducive to achieving the ideal heating effect.
Water quality of Heating system
As the terminal equipment of the system, the radiator should meet the operation requirements of the whole system, among which the water quality is an important factor.The current heating water quality is not up to standard, and the corrosion resistance of the general new material of the radiator has been reduced. The radiator with the longest service life should belong to the cast iron radiator. At present, the third generation cast iron radiator has no sand in its inner cavity to improve the corrosion resistance, which is suitable for use in any water quality area.
http://www.bzradiator.com/